Dualtron X User Manual
09
How to use the product
1) Product unfolding
2. Set up folding part
Lock the folding knob firmly and check for
slack or loosening during the drive.
4. Length adjustable side stand
3. Expand handlebar
Push both handlebars out to the end and expand.
The length of the side stand can be adjusted according to the
height of the product.
Loosen the side stand's length adjustment screw, slide the side
stand to the left or right, adjust it to the height of the product, and
tighten the length adjustment screw.
Side stand stability check and length adjustment are required for
safe positioning of the product.
* Pay attention to loosening and breaking of the anti-reverse bending screws located at the
top of the side stand.
1. Raising handle post (Steering tube)
Release the folding knob and push handle
post all the way end to raise up.
folding knob
Length
adjustable
screw
Anti-reverse
bending screw
CAUTION
To Next Page
Loading...
