Ducar DT36V - Assembly

To Next Page

To Previous Page



10



4. Assembly

WARNING Stoptheengineandunplugthesparkplugbeforeanyrepairsormaintenanceoperations.



WARNING DONOTattempttostartthismowerwithoutthemowerfirstbeingFULLYassembled.



WARNING DONOTattempttostartthismowerwithoutfirstaddingSAE10W/30engineoiltothe



engine.



efore assembling, please take all parts out from the package and place them on the ground, carefully

checkifallthecomponentsareinreadinessandnotbroken.



4.1. Liftfrontwheel

Pullthefrontwheeldownwardsothatthefrontwheelcanrotatefreely,then liftthefrontwheelbrackettoaproper

position and the front wheel bracket will be fixed automatically by the spring. The tiller can stand with no other

support.

4.2. Attachingthehandlebar

AttachthehandlebartothehandlebarsupportproperlytoaligntheassemblyholesandthenfixwithM8*45bolt.



4.3. Dragbar

Firstattachthedragbar(7)tothedragbarholder,chooseaproperheightandthenlockthedragbar

withR‐typelockingpin.