50
E
Chain tension inspection (fig. 54)
With the motorcycle on the side stand, the chain must
have a min. distance of 25 mm from the swingarm.
If this is not the case, contact a Ducati Dealer or
Authorized Workshop for proper chain tensioning.
Warning
Correct tightening of the eccentric hub clamping
screws is essential to rider and pillion passenger’s safety.
Important
Improper chain tension will lead to early wear of
transmission parts.
fig. 54
Chain lubrication
The chain fitted on your motorcycle has O-rings that keep
dirt out of and lubricant inside the sliding parts. The seals
might be irreparably damaged if the chain is cleaned
using any solvent other than those specific for O-ring
chains or washed using steam or water jets. After
cleaning, blow the chain dry or dry it using absorbent
material and apply SHELL Advance Chain or Advance
Teflon Chain on each link.
Important
Using non-specific lubricants may lead to severe
damage to chain, front and rear sprocket.
To Next Page
Loading...
