Need help?Do you have a question about the Ducati CTR32 and is the answer not in the manual?
General| Brand | Ducati |
|---|---|
| Model | CTR32 |
| Category | Control Unit |
| Language | English |
Explanation of the inputs used for gate control, such as start and pedestrian start.
Description of safety inputs like stop, photo-cell, and photostop for gate protection.
Details on outputs for signals like the blinker, motors, and electric lock control.
Information on the 230 Vac mains power input and 24 Vac low voltage output.
Details on inputs for accessories like the aerial for radio receiver connection.
Explanation of the status indicated by the various LEDs (DL3, DL2, DL4, DL6, DL5, DL1).
Description of the RV1 trimmer for regulating slow-down speed and motor power.
Explanation of dip switches for selecting operating modes, kickback, and wing delay.
Details on push-buttons P1, P2, and P3 for programming codes, work time, and pause time.
Information on fuses F1 (mains power) and F2 (low voltage) for protection against anomalies.
Details on power regulation, maximum start-up power, and motor torque handling.
To Next Page