Changing bulbs
Before replacing a burnt-out bulb, make sure that
the new one matches the voltage and
specifications in paragraph "Electric System".
Have the bulbs changed at a Ducati Dealer or
authorised Service Centre.
Monster 1200
Monster 1200 S (USA version only)
Undo the screw (1) and detach the lens (2) from the
turn indicator
The bulb has a bayonet joint: press and twist counter
clockwise to remove it. Remove the bulb, then fit the
new one by pressing and turning clockwise until it
clicks into its seat. Refit the lens by the tab
in the corresponding slot in the turn indicator
Tighten the screw (1).
Fig 225
309
To Next Page