Instrument panel
(Dashboard)
Instrument panel
1) Display.
2) NEUTRAL LIGHT N (GREEN).
Comes on when in neutral position.
3) HIGH BEAM LIGHT
(BLUE).
It turns on to indicate that the high beam lights are
on and when the flasher is activated.
4) ENGINE OIL PRESSURE LIGHT
(RED).
Comes on when engine oil pressure is too low. It
must turn on at "KEY-ON", but must turn a few
seconds the engine has It may
come on when the engine is hot, however, it should
go out as the engine revs up.
If the ENGINE OIL light stays ON, stop the
engine or it may severe damage.
5) FUEL WARNING LIGHT
(AMBER YELLOW).
Comes on when fuel is low (see chapter “Top-ups”).
6) TURN INDICATOR LIGHTS (GREEN).
Illuminates and flashes when the turn indicator is in
operation.
7) "ENGINE DIAGNOSIS - EOBD" LIGHT
(AMBER YELLOW).
It turns on in the case of "engine" errors and in some
cases will lock the engine.
8) GENERAL WARNING LIGHTS (RED).
The lights turn on when RPM value reaches the first
threshold before the rpm limiter kicks in;
94
To Next Page