Vehicle
Before the motorcycle using another
vehicle, follow the safety instructions below.
●
Remove all loose objects and accessories from
the vehicle.
●
Align the front wheel straight in the riding
direction and lock it properly to prevent any
movement.
●
Engage the first gear.
●
Use the anchoring straps and apply them to
strong components (e.g. frame) and NOT to the
handlebar (or handlebars, where present) or to
components that could break (e.g. handgrips,
rear-view mirrors, etc.).
●
The straps or ropes must NOT rub against any
painted motorcycle components.
●
The suspensions, if possible, must be in a
compressed position so as to allow less
movement of the vehicle with respect to the
road during
Do NOT the ropes to the handlebar.
Fig 230
320
To Next Page
Loading...
