Front brake lever
Pull in the lever (1) towards the twistgrip to operate
the front brake. The system is hydraulically operated
and you just need to pull the lever gently.
The brake lever has a dial adjuster (2) for adjusting
the distance between lever and twistgrip on the
handlebar. The lever distance can be adjusted
through 10 clicks of the dial (2). Turn clockwise to
increase lever distance from the twistgrip. Turn the
adjuster counter clockwise to decrease lever
distance.
Before using these controls, thoroughly read
instructions under "Moving
Set front brake lever when motorcycle is
stopped.
Fig 44
75
To Next Page