Ducati Monster 696 ABS - Back-Lighting Setting

Back-lighting setting
This function allows backlighting setting of the
instrument panel.
To set backlighting, go into the menu "LIGHT SET"
page.
Holding button (1, Fig 14) pressed in position B " "
for 3 seconds in this menu page gives access to the
setup mode and the following pages are displayed,
one after the other.
- Page 1 - "LIGHT MAX" set up:
Within this page backlighting is set to maximum
power; press button (1, Fig 14) in position B "
"
to go to page 2.
- page 2 - "LIGHT MID" set up:
Within this page backlighting is reduced by
approximately 30% compared to its maximum
power; press button (1, Fig 14) in position B "
"
to go to page 3.
- page 3 - "LIGHT MIN" set up:
Within this page backlighting is reduced by
approximately 70% compared to its maximum
power; press button (1, Fig 14) in position B "
"
to go to page 1.
B= ON for 3 secs.
Press B
Press B
Press B
B= ON for
3 secs.
B= ON for
3 secs.
B= ON for
3 secs.
Fig 28
55