Erase DDA
This function deletes all data from the DDA: the data
logger must be connected to vehicle wiring.
To erase data, enter the menu page "Erase DDA".
If you press button (1, Fig 14) in position B " " for 3
seconds and the DDA is not acquiring data, the
message "WAIT…" is shown on the instrument panel
for 10 seconds; after these 10 seconds, message
"ERASE OK" is displayed for 3 seconds to confirm that
the data in the DDA data logger have been erased.
If button (1, Fig 14) is pressed in position B "
" for 3
seconds while the DDA data logger is acquiring data,
the data logger memory is not erased and the
instrument panel displays message "FAIL" for 3
seconds.
63
To Next Page