At Key-On, the instrument panel always shows the
following information (de-activating any previously
activated functions):
ODOMETER
SPEED
RPM BARGRAPH
ENGINE OIL TEMPERATURE BARGRAPH
With the switch (1Fig. 9) in position B “ ” the
Odometer readout (TOT) will cycle through the
following functions:
TRIP
TRIP FUEL (only if active)
CLOCK
T AIR
before returning to Odometer display.
Pressing switch (1Fig. 9) in position A “ “ gives
access to the MENU and the following functions are
displayed one after another:
ERROR (only if active)
BATT
RPM
LIGHT SET
LAP (OFF or ON)
LAP MEM