Need help?Do you have a question about the Duerkopp Adler DACeco M-TYPE and is the answer not in the manual?
General| Type | Industrial Sewing Machine |
|---|---|
| Model | DACeco M-TYPE |
| Stitch Type | Lockstitch |
| Motor | Integrated Direct Drive |
| Motor Power | 550 W |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Stitch Length | 0 to 12 mm |
| Max. Sewing Speed | 5000 stitches per minute |
| Clearance under sewing foot | 20 mm |
Configures the soft start function for gradual acceleration.
Sets the needle's final position (up or down) after operation.
Allows manual adjustment of the maximum sewing speed.
Details electrical, mechanical, and performance specifications of the drive.
Specifies the approved applications and environmental conditions for the unit.
Instructions for installing the pedal sensor and connecting it mechanically.
Guidance on safely connecting the control unit to the electrical mains supply.
Measures and recommendations for ensuring electromagnetic compatibility.
Visual representation of internal electrical connections and component layout.
Defines the number of stitches in the soft start sequence.
Sets the starting speed for the soft start function.
Configures the highest achievable sewing speed.
Adjusts the force holding the needle at standstill.
Sets needle stop points and calibrates position sensing.
Selects the sewing machine model compatibility for the control unit.
To Next Page