Duke SUB-CP-TC86 User Manual

Installation and
Operation Manual
P/N 529109
REV B 10/16/2018
This manual is Copyright © 2018 Duke Manufacturing Co. All rights reserved.
Reproduction without written permission is prohibited. Duke is a registered
trademark of the Duke Manufacturing Co.
CAUTION:
Please read this manual completely before attempting
to install, operate or service this equipment
TRI-CHANNEL COLD PAN
MODEL
SUBCPTC

Duke SUB-CP-TC86 Specifications

General

Brand	Duke
Model	SUB-CP-TC86
Category	Cold Pan
Language	English

Summary

Safety Information

Safety Symbol Definitions

Explains meanings of WARNING and CAUTION symbols used throughout the manual.

Technical Specifications and Diagrams

Wire Diagram

Provides a detailed wiring diagram for the Tri-Channel Cold Pan, showing connections and components.

Specifications

Details physical dimensions, capacity, and model variations of the cold pan units.

Electrical and Refrigerant Specifications

Lists electrical ratings (volts, amps, watts) and refrigerant details for different models.

Installation Procedures

Inspection for Damage and Unpacking

Procedures for inspecting the unit for damage upon delivery and safely unpacking it.

Tools and Parts Needed for Installation

Lists tools not included and parts/hardware included for the installation process.

Unit Placement and Adjustment

Guidelines for positioning the unit within a lineup and leveling it using adjustable legs.

Installation and Adjustment of End Glass (Adjacent Units)

Step-by-step instructions for installing and aligning end glass panels between adjacent cold pans.

Installation and Adjustment of End Glass (End of Lineup)

Procedures for installing and aligning end glass panels for cold pans at the end of a lineup.

Adjusting Front Glass

Instructions for adjusting the front glass panels on fixed or fold-down day covers.

Operation Instructions

General Information

Basic guidelines for operating the cold pan, including initial cleaning and checking the rating label.

General Cleaning Instructions

Instructions for daily cleaning of the unit using warm, soapy water and mild detergents.

Polyethylene Cutting Boards

Recommended cleaning methods for polyethylene cutting boards using hot water and cleaners.

General Operating Instructions

Steps for pre-chilling, setting the thermostat, loading product, and turning off the unit.

Preventive Maintenance

Cleaning the Condenser Coil

Procedures and warnings for cleaning the condenser coil to prevent overheating and compressor failure.

Troubleshooting

Troubleshooting Guide

A table listing common symptoms, their causes, and recommended remedies for unit issues.

Customer Service Information

Contact details and fields for recording model/serial numbers for customer service inquiries.