4
2
The back of the watch box
3
Controls
Power Switch Pause Switch AC Adapter Input Port
PAUSE SWITCH:
When you turn on the "pause switch" and open the front cover, all drums will
immediately stop rotating. When you turn off the "pause switch" and open
the front cover, all drums continue rotating. Your watch will always stop at
the 12 o'clock position when the cycle is complete.
With the adapter connected, turn on the "Power Switch". The display will be lit
and all options will flicker back and forth, then you can set the programs by
Touchscreen Control Panel or the Remote Control.
3.1 LCD Touchscreen Control Panel
Ticked
icon
Switch(Run
/Pause/Stop)
Working Hour
/Motor Options
Direction Lights Control
TPD
ALL Mode
To Next Page
Loading...