EasyManua.ls Logo

Dulevo elite 90 DK - F - Sostituzione Ruota Posteriore; F - Rear Wheel Replacement

Default Icon
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-6-
7
5
4
6
8
6
6.2.f - SOSTITUZIONE RUOTA POSTERIORE
- Parcheggiare la macchina su terreno piano.
- Inserire in freno di stazionamento.
- Applicare il crick (4) sotto il telaio della macchina
vicino al gancio di traino (5).
ATTENZIONE PERICOLO:
Utilizzare un martinetto adeguato al peso della mac-
china; il non corretto posizionamento dello stesso
può provocare la caduta della macchina o il danneg-
giamento dei vari componenti della stessa.
NOTA:
L’operazione di sollevamento della macchina deve
essere eseguita con il contenitore riuti vuoto.
- Sostenere con due cavalletti (6) gli angoli posteriori
della macchina in modo da impedire uno scivo-
lamento laterale.
- Smontare i quattro bulloni (7) (M12) della ruota.
- Cambiare la ruota (8).
- Stringere i bulloni con la coppia di serraggio indicata
nel paragrafo “Controllo serraggio ruote”.
6.2.f - REAR WHEEL REPLACEMENT
- Park the machine on a at surface.
- Pull the hand brake.
- Apply the crick (4) under the machine frame, close
to the hoisting hook (5).
WARNING DANGER:
The jack used must suit the machine’s weight; the
machine can fall or several of its parts may be dam-
aged if the jack is not positioned correctly.
NOTE:
The vehicle lifting operation must be carried out
while the waste container is empty.
- Sustain with two stands (6) the rear machine angles
in order to avoid side skidding.
- Disassemble the four bolts (7) (M12) of the wheel.
- Change the wheel (8).
- Tighten the bolts with the torque wrench settings indi-
cated in the paragraph “Wheels tightening check”.

Table of Contents

Related product manuals