Need help?Do you have a question about the Dulevo 100 elite and is the answer not in the manual?
General introduction to the manual and its purpose.
Crucial safety information for operators and manufacturer's responsibility.
Machine compliance with European directives and safety requirements.
Procedures for receiving and checking the machine upon delivery.
Specifies the intended applications and cleaning operations.
Prohibits specific usage like handling flammable materials.
Operator height, corrosive environments, and extreme conditions.
Pre-operation checks for safety and functionality.
Comprehensive safety guidelines for operation and supplies.
General guidelines for maintenance procedures.
Safety measures and procedures in case of fire.
Procedures for safe dismantling and waste disposal.
Identification and explanation of safety warning labels on the machine.
Description of various safety features and their functions.
Identification of areas with inherent potential dangers.
Procedures for safe loading, unloading, and towing.
Detailed dimensions and diagrams of the machine.
Key performance specifications like weight, engine, speed, and capacity.
Information on sound pressure and power levels.
Data on operator exposure to vibrations.
Details on serial numbers and identification plates.
Procedures for accessing engine, battery, and filter compartments.
Diagrams illustrating machine layout and components.
Overview of the control panel and dashboard functions.
Functions and controls related to the optional operator's cab.
Instructions for adjusting operator seat and other components.
Daily checks to ensure the machine is in good working order.
Step-by-step instructions for starting the engine for different models.
Procedures for moving the machine between locations.
Instructions for starting and performing sweeping tasks.
Guidelines for charging the battery on electric models.
Procedures for prolonged stops and inactivity.
General and preliminary maintenance steps.
Procedures for cleaning and replacing worn parts.
Overview of planned maintenance intervals.
Tasks to be performed every 8 hours of operation.
Tasks to be performed every 40 hours of operation.
Tasks to be performed at specific hour intervals (250, 500, 1000).
Table listing all fluids and their capacities.
To Next Page
General
