Preset Management – The Librarian software can be used to rename, backup, and restore
your presets – or return to the factory settings.
Millisecond or BPM Mode – Andromeda’s delay time can be set in either milliseconds or
beats per minute. By default the unit will use milliseconds, but you can change it to BPM using
the Librarian.
MIDI – Andromeda can be used with standard MIDI controllers. A complete list of MIDI
commands is available at www.seymourduncan.com/pedal/andromeda. By default
Andromeda uses ANY MIDI channel, but you can select 1-16 in the librarian.
To Next Page
Loading...
