Need help?Do you have a question about the Duncan Dirty Deed and is the answer not in the manual?
Sets the overall level of your signal.
Adjusts high frequencies (+/-12dB boost/cut).
Adjusts low frequencies (+/-12dB boost/cut).
Regulates distortion amount and sustain.
Describes True Bypass, Input/Output, and Power connections.
Explains the location and function of the battery door.
Follow these steps to connect and power the pedal for initial use.
Provides a versatile sound for rhythm, chords, and lead playing, characterized by fullness and saturation.
Scoops mids, bumps lows/highs for a mean, aggressive, razor-sharp sound.
Responsive, dynamic chord sound for clean or roaring tones.
Lead tone with singing sustain and clarity for fast passages.
Information on the pedal's internal circuitry and bypass method.
Technical details on gain range, EQ frequencies, signal-to-noise ratio, and distortion levels.
Details regarding power input requirements and energy consumption.
Key physical attributes including the pedal's size and weight.
Explains the terms of the one-year limited warranty covering repair or replacement.
Outlines the process for returning defective units, including RMA requirements.
Specifies circumstances, like modification, that void the product warranty.
Guidance on disposing of the product responsibly through designated recycling points.
General| Controls | Gain, Tone, Level |
|---|---|
| Bypass | True Bypass |
| Type | Distortion |
| Power Supply | 9V DC |
| Input | 1/4" Mono Jack |
| Output | 1/4" Mono Jack |
To Next Page
