To Next PageTo Next Page
Need help?Do you have a question about the Dunster House CORONET E10-2525COR-45 and is the answer not in the manual?
Details of all wooden parts, including dimensions and quantities.
List of all nails and screws required for assembly, with specifications.
List of all bolts, nuts, washers, and accessories needed for the cabin.
Instructions and recommendations for treating the cabin's timber components.
Steps to take before starting the cabin assembly, including storage.
List of tools and number of people recommended for assembly.
Details on how to contact customer services and access assembly guides.
Procedure for reporting and resolving issues with parts.
Solutions for common problems with door locks and sticking doors.
Explains natural wood properties like knots and splits.
Techniques for fitting timber that may be twisted or warped.
Advice on how to manage and straighten timber before installation.
A summary of the main steps involved in building the cabin.
Details for bearer placement and the first layer of bottom wall logs.
Information on standard wall logs and various trim pieces.
Specific types of wall logs (F and FB) and their dimensions.
Components for finishing roof edges and door frames.
Parts for supporting the roof purlins.
Components for the cabin's floor and roof structure.
Structural elements for the roof apex and purlin system.
Components for structural bracing and roof finishing.
Specific types of top wall logs used in the cabin construction.
Details of the door frame parts and window units.
Visual guide showing the layout and placement of base bearers.
Critical checks for maintaining cabin stability during initial wall construction.
Instructions for positioning and securing the first layer of wall logs.
Diagrams illustrating the log arrangement for the front and rear walls.
Diagrams showing the log configuration for the side walls.
Steps to assemble and ensure the squareness of the door frame.
Information regarding the pre-assembled nature of the cabin windows.
Guidance on aligning frames and attaching branding plates.
Instructions for installing decorative and functional bars on windows/doors.
Procedures for fitting and adjusting door sashes for proper closure.
Steps for installing the door locking mechanism.
Fitting the apex structure and decorative trims above the door.
Detailed steps for installing roof purlins and their support brackets.
Instructions for laying and securing the primary roof deck.
Attaching trim pieces to reinforce the roof edges.
Installing fascia boards and wind braces for roof finishing.
Installing protective edging along the roof eaves.
Attaching fascia boards and wind braces to the roof structure.
Instructions for fitting optional insulation panels to the roof.
Instructions for fitting optional insulation panels to the floor.
Step-by-step guide for applying the waterproof felt layer to the roof.
Specific felt application method for the short canopy design.
Step-by-step guide for installing rectangular roof shingles.
Techniques for completing the roof ridge with shingles.
Specific shingle application method for the short canopy design.
Instructions for securely attaching storm braces for structural support.
Installing ventilation units at the roof apex.
Instructions for laying and securing the floor boards.
Attaching trim pieces to the edges of the floor.
Procedures for accurately marking and cutting openings for additional doors/windows.
Method for fixing and aligning additional door/window frames.
General| Category | Garden Houses |
|---|---|
| Model | CORONET E10-2525COR-45 |
| Wall Thickness | 28mm |
| Roof Type | Apex |
| Doors | Double doors |
| Floor Included | Yes |
| Treatment Required | Yes |
| Dimensions | 2525mm x 2525mm |
| Material | Wood |
