To Next PageTo Next Page
Need help?Do you have a question about the Dunster House TERMINATOR E10-4030TM-45 and is the answer not in the manual?
Explains the natural characteristics and properties of the timber used in the cabin.
Provides guidance on applying timber treatment to protect the cabin from weather.
Lists the necessary tools and equipment for assembling the log cabin.
Procedures for reporting and obtaining replacement parts for damaged or missing items.
Solutions for common problems with door locks and sticking doors.
Practical advice and methods to ensure successful cabin assembly with various timber conditions.
Methods for checking and maintaining the cabin's squareness during wall construction.
Guidance on installing decorative bars and drip bars on windows and doors.
Steps to adjust door sashes for proper alignment and closing.
Instructions for fitting door bolts to secure the cabin doors.
How to correctly position and secure the tongue and groove roof boards using nails.
Attaching reinforcement trims to the underside of the roof boards for added stability.
Steps for installing insulating panels on top of the roof boards.
Guidance on fitting insulating material between the bearers before laying floor boards.
Securing fascia boards and wind braces to the cabin structure for weather protection.
How to attach storm braces to the cabin walls and roof for added stability.
Instructions for installing circular vents at the apex of the roof for ventilation.
How to position and secure the floor boards, allowing for expansion gaps.
Attaching decorative and protective trims around the floor edges.
Recommended dimensions and spacing for cutting window openings.
General| Model | TERMINATOR E10-4030TM-45 |
|---|---|
| Category | Garden Houses |
| External Width | 4.0m |
| External Depth | 3.0m |
| Ridge Height | 2450 mm |
| Roof Material | Felt |
| Floor Material | Tongue and groove |
| Treatment Required | Yes |
| Cladding Material | Timber |
