EasyManua.ls Logo

Durafly ME-163 - Introduction; Specifications

Durafly ME-163
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INTRODUCTION:
SPECIFICATIONS:
Wingspan: 950mm (37.4”)
Lenght: 585mm (23”)
Flying weight: 850g (29oz)
Controls: 5 channel: ‘Elevons’ (Alierons/Elevator), Throttle, Rudder, Landing gear)
ESC: Durafly 40amp (pre-installed)
Motor: Durafly 2836 2200kv Brushless outrunner (pre-installed)
Prop: 6x4
Battery reccommened: 1300-2200mah 11.1v 3S lipo (30C min)
Radio System: Min 6 channel Rx and Tx. Elevons/delta setting on Tx required.
The Durafly Me-163 is truly a ground breaking model. Not only does this Komet
feature a fully working scale 'dolly' style undercarriage and blistering performance, it
can also carry a model rocket engine! As a 'PnF' model, all electronics come
pre-installed and ready to hook up to your choice of 6ch receiver. Its molded EPO
construction has a highly detailed surface finish externally, and carbon reinforcement
internally and features a color matched hard plastic belly skid, good access to all
electronics via the battery/canopy hatch and has excellent cooling through out.
Designed for pilots with some experience, the Me-163 benefits from incredible flight
performance and stability. Full power climb outs, virtually unlimited vertical,
aero-batics, huge loops and very fast passes are easily had at full throttle. Yet slow
the Me-163 down and she's just as stable and has no hint of a stall. Using the
recommended 2200mah 30-65C 3S lipo and supplied 6x4 prop, you can expect flight
times well beyond 6 minutes and with excellent power. Combine this with the working
scale dolly system, an airframe designed to take a model rocket engine and an
extreme level of scale detail, and you've got the most authentic R/C Me-163 on the
market today.
1

Related product manuals