30
6.2 Print Quality
Continuous feeding labels
The printer setting may go wrong. Please do the Initialization and Gap/Black
Mark Calibration.
No print on the label
Is the label or ribbon loaded correctly? Follow the instructions in Loading the
Paper or Loading the Ribbon.
Does the ribbon run out? Follow the instructions in Loading the Ribbon.
Poor print quality
Top cover is not closed properly. Close the top cover completely and make sure
the right side and left side levers are latched to top cover properly.
Clean the thermal print head.
Adjust the print density setting.
Ribbon and paper media are not compatible.
To Next Page
Loading...