3
SYMBOLS
IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V
Volts Voltage (potential)
A
Amperes Current
Hz
Hertz Frequency (Cycles per second)
W
Watt Power
min
Minutes Time
Direct current Type or a characteristic of current
n
o
No load speed Rotational speed, at no load
.../min
Revolutions or reciprocation per minute Revolutions, strokes, surface speed, orbits etc. per minute
0
Off position Zero speed, zero torque...
Arrow Action in the direction of arrow
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand operator’s manual before
using this product
Eye Protection
Always wear safety goggles or safety glasses with side shields and a full face shield
when operating this product.
Breathing protection Wear respirator or proper breathing protection when using this product
Safety Alert Precautions that involve your safety
Safety Alert Risk of electric shock
TM
Ni-Cad RBRC seal Designates Ni-Cad battery recycling program
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in property damage.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them
these instructions also to prevent misuse of the product and possible injury.
AC adapter is UL listed.
To Next Page
Loading...