DuraPro PalmPRO - Features and Specifications; Product Overview; Tool Controls and Usage

8
KNOW YOUR PALMPRO
Before attempting to use this product, familiarize yourself with all operating
features and safety rules.
MODE SELECTOR
The switch trigger can be locked in the OFF position. This feature helps
reduce the possibility of accidental starting when not in use.
FORWARD/REVERSE SWITCH (DIRECTION OF ROTATION SELECTOR)
The PalmPRO has a forward/reverse switch trigger.
STORAGE
When not in use, remove bit from PalmPRO.
LED LIGHT
This tool features an integrated LED light for low-light use.
TORQUE ADJUSTMENT RING
By adjusting the torque you can control how much force is applied.
FEATURES
PRODUCT SPECIFICATIONS
Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.2 Volt DC
Chuck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4"
Gear Train . . . . . . . . . . . . . . . . . . . . . . . . . . . .One Speed
Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . .Single Speed
No Load Speed . . . . . . . . . . . . . . . .450 revolutions/min.
Charger Input . . . . . . . . . . . . . . . . 120 V, 60 Hz, AC only
Charge Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hours
Torque. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Variable
FORWARD/ REVERSE
SWITCH TRIGGER
CHUCK
MODE SELECTOR
WITH LOCK
LED LIGHT
TORQUE ADJUSMENT RING
CONTENTS:
1 – 7.2v DX PalmPRO
®
Pro Series
1 – SnakeDriver
®
12” fl exible shaft
1 – AC power adapter
2 – Phillips 50mml screw bits
(#1, #2)
2 – Slotted 50mml screw bits
(1/8”, 3/16”)
2 – Square 50mml screw bits
(S1, S2)
1 – 1/4” socket adapter
9 – 1/4” drive chrome vanadium sockets
(3/16”, 1/4”, 9/32”, 5/16”, 11/32”,
3/8”, 7/16”, 15/32”, 1/2”)
1 – Hook driver attachment
1 – Durable carry case