Duratech Hot Splash HS35 - Preparing the Heat Pump for Use; Typical Configuration & Distance from the Pool; Hose Connection

4
Hot Splash
(1)
Min. 2
Meter
circulation
pump
Filter
(2)
J#G5&&#*5&*#,G#6(-(676#YU!#6&+&5#*5,7-<#+:&#:&*+#%76%#:*.#+,#9&#1&%+#'=&*5#G5,6#any object(1).
k,#-,+#,9.+57'+#+:&#G*-U#=&*?&#*+#=&*.+#B"d6#G5&&#7-,9.+57'+&<#.%*'&#(-#G5,-+#,G#+:&#G*-"
J==#G&&<(-E#,G#H*+&5#+5&*+6&-+#+,#+:&#%,,=#H*+&5#:*.#+,#9&#<,-&#<,H-.+5&*6#,G#+:&#:&*+#%76%bVc
;7+#+:&#:&*+#%76%#,-#*#W*+U#.,=(<#9*.&"
It is normal for condensation water to come out of the heat pump when it is operating. This is not a fault or
leak!
It is normal for condensation to come out of the heat pump. This is not a leak or fault with the unit. If the
:76(<(+D#(.#?&5D#:(E:U#+:&#',-<&-.*+(,-#',7=<#9&#*#-769&5#,G#=(+&5.#*#<*D"
4. Preparing the heat pump for use
A"B"#CD%('*=#',-)E75*+(,-#F#<(.+*-'&#G5,6#+:&#%,,=
C:&#:&*+#%76%#.:,7=<#9&#=,'*+&<#*+#=&*.+#V6#*H*D#G5,6#+:&#.H(66(-E#%,,="#8-#-,56*=#,%&5*+(,-U#+:&#*(5#+*1&-#
9D#+:&#:&*+#%76%#(.#',,=&<#<,H-#*-<#H*+&5#6*D#',-<&-.#,-#+:&#)-.#,G#+:&#&?*%,5*+,5#*-<#57-#,7+#,G#+:&#
bottom of the unit.
4.2. Hose connection.
Step 1 Step 2