DURAVIT SensoWash i Plus Mounting Instructions

en
Installation instructions
An installation video of the complete integrated shower
toilet is available on
www. duravit.us/mnt_sensowash_i.
Simply use this QR code
Ensure that there is enough floor space to install the
toilet and that bathroom door will open and close without
obstruction. Ensure that the lid will open and close
without obstruction against window frames, shelves and
other bathroom furniture.
7
Sealing the screw holes
> Put sealing material in the screw holes.
14
Positioning of mounting brackets
> Confirm the exact position of the mounting
brackets.
> Adjust position according to mounting template
if necessary.
20
Removing the right side panel
NOTICE
Risk of scratched surfaces!
> Do NOT use pointed tools to remove the panel.
> Remove the panel by hand.
23
Removing the left side panel
NOTICE
Risk of scratched surfaces!
> Do NOT use tools to remove the panel.
> Remove the panel by hand.
28
Removing the installation blocks
> Confirm that the water supply hose and power
supply cable are inside the toilet.
> Lift the toilet.
> Remove the installation blocks.
29
Positioning the toilet
> Do NOT press the L fixing blocks and flange plate
when putting down the toilet.
> Press down the toilet until the product is in place.
> Do not kink hose.
49
Positioning the remote control mounting bracket
> Continue with step 51 for screw mounting.
> Follow the instructions up to step 50 for mounting
with adhesive and then continue with step 55.
58
Testing
> Connect the power and water supply.
> Confirm that the product functions properly
according to the operating instructions.
57242_Mounting_SensoWash i Plus_US/19.07.1 5

DURAVIT SensoWash i Plus Specifications

General

Brand	DURAVIT
Model	SensoWash i Plus
Category	Toilets
Language	English