DUROMAX XP10000EH - Page 39

39
Close choke
The choke lever is located above the air lter to the right
of the recoil start. Slide the lever to the left to cut the air
supply and allow more gas into the engine to start.
Turn engine switch to START
The key switch is located on the left side of the front power
panel. Insert the key and turn to the start position to start
the generator. Allow the key to return to the run position
once started.
6.
5.
Open choke
Push the choke to the OPEN position as the engine warms up.
7.
Turn breaker ON / Connect
The breaker is located on the right side of the front power
panel. Flip the breaker up to allow the power to ow to the
receptacles. Connect your devices to the receptacles on the
front panel. Start with the largest loads rst.
8.
Push the choke to the OPEN position as the engine warms up.