Shut breaker o
The breaker is located on the right side of the front power
panel. Flip the breaker down to prevent accidental load
when starting the generator.
1.
Turn gas valve on
The gas valve is located above the recoil start on the bottom
of the fuel tank. Rotate the valve clockwise to the vertical
position to turn on the gas supply.
2.
STARTING THE GENERATOR (CONTINUED)
Starting the Generator Using Propane
Connect propane hose
Connect propane tank
The propane regulator / decompression valve is located
on the frame of the generator below the OHV valve cover.
Ensure the propane hose is securely connected to the
regulator/compression valve.
There propane hose is located on the left side of the
regulator, below the OHV valve cover. Screw the open ACME
nut connection to your propane tank and turn the tank on.
3.
4.
38
To Next Page
