Duronic BPM450 - Setting Date, Time and Measurement Unit

12
Setting the date, time and measurement unit
It is important to set the clock before using your blood pressure monitor,
so that a time stamp can be assigned to each record that is stored in the
memory. (year :2000—2050,time:24 H)
1. When the unit is off,
press and hold “SET”
for 3 seconds to enter
the mode for year
setting.
2.Press the “MEM” to
change the [YEAR].
3.When you get the
right year, press
“SET” to select and
turn to next step
automatically.