EasyManua.ls Logo

Duronic SADV1 - Storage; Disposal; Faq

Duronic SADV1
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 23
Failure Possible Causes Solutions
Main Power OFF Turn on the switch
No power The appliance is not correctly
connected to your power
Loose light tube Re-install the light tube
Defective light tube Change the light tube
Light tube at the end of life Change the light tube
Loose light tube Re-install the light tube
Cleaning Up a Broken Tube FAQ
Storage
Disposal
Important
- Before you clean the unit, always switch it off, unplug it and let it cool off.
- Do not touch the unit with wet hands.
- Clean using a damp cloth, to which you can apply a little detergent if
necessary.
- Do not let water run into the appliance or spill water onto the appliance.
- Cleaning can be done once per month.
Important
This chapter lists the questions most frequently asked about the appliance. If
youcannotndtheanswertoyourquestion,pleasecontactcustomerservice
or the dealer for assistance.
When the “Daylight” is not being used, it should be stored in a dry location
out of reach of children. Do not keep the “Daylight” connected to a power
source. The “Daylight” is designed to be stored in the following environmental
conditions:
1) Ambient temperature from +5oC (41oF) to 50oC (122 oF).
2) Relative humidity of max. 90%.
3) Atmospheric pressure: 700-1060hPa
Please note that this product is marked with the WEEE symbol on the left.
This means that this product must not be disposed of together with ordinary
household waste, as electrical and electronic waste must be disposed of
separately.
If you have any questions, please contact your local authorities
responsible for waste disposal.
One side of the
product is out of
order
No light