4.1 Type plate
The type plate can be found on the side of the
amalgam separator motor.
1 Type plate
4.2 Evaluation of conformity
This device has been subjected to conformity
acceptance testing in accordance with the cur-
rent relevant European Union guidelines. This
equipment conforms to all relevant requirements.
4.3 Approvals
Centre of Competence in Civil Engineering,
Berlin
Test number Z-64.1-22
Separation method compliant with standard
ISO 11143 Type 1
Product description
9000-606-44/30 2011V003 13
EN
To Next Page
Loading...
Need help?
General
