To Next Page
B
Brian WoodsSep 5, 2025
What does error ER 204 mean on my Durr Dental equipment?
- FFrank PadillaSep 5, 2025
Error ER 204 means pressure balancing failed in the vacuum test.
What does error ER 204 mean on my Durr Dental equipment?
Error ER 204 means pressure balancing failed in the vacuum test.
What does error ER 203 mean on my Durr Dental equipment?
Error ER 203 means failure to comply with the temperature limits during the vacuum test.
Why does my Durr Dental equipment show error ER 006?
Error ER 006 indicates that the water conductivity is higher than 30uS/cm.
What does error ER 201 mean on my Durr Dental equipment?
Error ER 201 means failure to comply with the parameters in the irst phase of the vacuum test.
What does error ER 153 mean on my Durr Dental equipment?
Error ER 153 means that the theoretical temperature is below the bottom limit for sterilisation.
What does error ER 152 mean on my Durr Dental equipment?
Error ER 152 means that the theoretical temperature is over the top limit for sterilisation.
What does error ER 200 mean on my Durr Dental equipment?
Error ER 200 means that the time to reach the vacuum pressure is too long in the vacuum test.
What does error ER 180 mean on my Durr Dental equipment?
Error ER 180 means that the pressure balancing time is too long.
What does error ER 170 mean on my Durr Dental equipment?
Error ER 170 means that the measured pressure is below the set parameter for the drying phase.
What does error ER 160 mean on my Durr Dental equipment?
Error ER 160 indicates that the final discharge time is too long.
General| Brand | Durr Dental |
|---|---|
| Model | Hygoclave 40 Plus |
| Category | Dental equipment |
| Language | English |
Details specific warnings for electrical, explosion, contamination, fire, and burn hazards.
Covers operation failure, body part crushing, infection, and environmental conditions.
Lists and explains the integrated safety mechanisms of the steriliser.
Specifies space, ventilation, and location requirements for safe installation.
Guides on safe lifting, handling, and support placement during installation.
Details the necessary electrical connections and safety measures.
Step-by-step guide for the initial activation and setup process.
Explains how to operate the autoclave and navigate its menus.
Guides on choosing, starting, and monitoring sterilisation cycles.
Details water quality specifications and methods for filling the feed tank.
Explains the procedure for emptying the discharge tank.
Lists error codes, their descriptions, and recommended reset procedures.
Lists alarm codes, their descriptions, and recommended reset procedures.
Provides solutions for various system messages encountered during operation.
Addresses common problems like door malfunctions, water quality, and leaks.
Covers issues with sterilisation control, discharge, drying, and balancing systems.
Addresses problems related to power, feed tank filling, and probe/electronic errors.
Solutions for generator, band malfunctions, and system messages.
