To Next Page
D
Donald JohnsonAug 27, 2025
What does error ER 130 mean on my Durr Dental equipment?
- CclarkashleeAug 27, 2025
Error ER 130 indicates that the pressure discharge time is too long.
What does error ER 130 mean on my Durr Dental equipment?
Error ER 130 indicates that the pressure discharge time is too long.
What does error ER 120 mean on my Durr Dental equipment?
Error ER 120 means that the time to reach the thermodynamic discharge pressure is too long.
What does error ER 140 mean on my Durr Dental equipment?
Error ER 140 means that the time to reach the sterilization pressure is too long.
Why does my Durr Dental equipment show error ER 006?
Error ER 006 indicates that the water conductivity is higher than 30uS/cm.
What does error ER 003 mean on my Durr Dental equipment?
General| Brand | Durr Dental |
|---|---|
| Model | Hygoclave 40 Plus |
| Category | Dental equipment |
| Language | English |
Details specific warnings for electrical, explosion, contamination, fire, and burn hazards.
Covers operation failure, body part crushing, infection, and environmental conditions.
Lists and explains the integrated safety mechanisms of the steriliser.
Specifies space, ventilation, and location requirements for safe installation.
Guides on safe lifting, handling, and support placement during installation.
Details the necessary electrical connections and safety measures.
Step-by-step guide for the initial activation and setup process.
Explains how to operate the autoclave and navigate its menus.
Guides on choosing, starting, and monitoring sterilisation cycles.
Details water quality specifications and methods for filling the feed tank.
Explains the procedure for emptying the discharge tank.
Lists error codes, their descriptions, and recommended reset procedures.
Lists alarm codes, their descriptions, and recommended reset procedures.
Provides solutions for various system messages encountered during operation.
Addresses common problems like door malfunctions, water quality, and leaks.
Covers issues with sterilisation control, discharge, drying, and balancing systems.
Addresses problems related to power, feed tank filling, and probe/electronic errors.
Solutions for generator, band malfunctions, and system messages.
