7. Hydraulic high fluid pressure.
Be careful when you work with hydraulics. Wear eye protection and gloves. Hydraulic oil under
great pressure may penetrate the skin and cause serious infections. See a doctor is you have
had had an injury. Ensure that no-one is standing close by when hydraulic functions are
performed.
8. Good lighting – a necessity.
The machine must only be used in daylight that secures a good overview of the operations – or
with artificial lighting which provides good overview of the work area.
Good lighting is very important with reference to safety.
9. Rotating parts – risk of crushing
The machine’s rotating parts may cause severe injuries. The same applies to risk of crushing
during operation.
All covers and protective equipment is to be fitted on the machine during use. The user is
responsible if an accident occurs as a consequence of defective protection.
Avoid all unnecessary stay in the working area when the machine is in operation.
Never put your hand in behind the protective screen even if the saw chain is in back
position.
10. Horizontal positioning and tidiness on the workplace
Always place the machine as horizontally and steady as possible to secure stable working
conditions.
Keep the workplace as tidy as possible. This contributes to generally better safety against
unwanted events.
11. Area of application
The machines are only intended for production of fire wood from “pure” wood material without
any contaminants. It is not allowed to employ the machine for other material such as
construction waste and similar with metal parts such as nails, screws and similar. The same
applies for materials that are polluted with plaster and similar coatings. The saw chain is only
designed for wood materials without contaminants.
12. Zero alcohol tolerance
Persons who are under the influence of drink or drugs must not operate the machine. The same
applies to tired people who do not have full control over their movements.
11
To Next Page
Loading...