Transport and handling before use
The VM420 body is equipped with a fork pocket (A) for handling with fork truck or pallet forks. Be
aware that one individual wood machine weighs about 875 kg. Use lifting equipment designed
for such total weight!
Preparation for moving with tractor.
The transporter is folded together in the joint E. Afterwards, the transporter is moved to an up-
right position by means of the winch wire. During this process, the protection cover is shifted in
point B Feeding table and the conveyor belt is adjusted to a vertical and horizontal position by
releasing the locking pin in
point G
Securing before moving
Finally, the connection between the feeding table and the transporter should be secured by
means of a strap for this purpose with fixing points as shown in the illustration. This is important
to ensure that the feeding conveyor is kept in place during transport and the connection between
the feeing table and the transporter is safely secured.
15
To Next Page
Loading...