Manual RMO-H
M-RH00NN-300-EN 21
8 Technical Data
Battery
• Type: 1 Cell – 5600 mAh Li-Po
(User replaceable)
• Nominal voltage: 3,7 V
• Recharge time: 2 hours
AC Adapter
• Input voltage: 90 – 264 V AC, 50/60 Hz
• Output voltage: 12 V DC
• Output current: 3 A
Output data
• Test current: up to 300 A DC
(regulated, user selectable)
• Output voltage: 3,7 V DC nominal (4,1 V max)
Measurement
• Resistance range: 0 – 2000 mΩ
• Resolution
0,1 – 999,9 μΩ 0,1 μΩ
1,000 – 9,999 mΩ 0,001 mΩ
10,00 – 99,99 mΩ 0,01 mΩ
100,0 – 999,9 mΩ 0,1 mΩ
1000 – 2000 mΩ 1 mΩ
• Typical accuracy*: ± (0,1 % rdg + 0,1 % FS);
• Guaranteed accuracy*: ± (0,2 % rdg + 0,2 % FS);
*valid under the maximum test current per the range being used.
CE – marking
• EMC: 2004/108/EC
• LVD: 2006/95/EC
Data storage and transfer
Interface
• Bluetooth: Device to PC connection
Internal Memory
• Internal: 2 GB SD Card
• Results storage: 1000 measurements
To Next Page
Loading...
Need help?
General