DV Power RMO-H User Manual

Manual RMO-H
M-RH00NN-300-EN 14
Setting Language
To set RMO-H’s language, please use the UP/DOWN buttons, and then ENTER button to select the Set
Language menu.
If the user is satisfied with the values, all the selections can be confirmed by pressing ENTER.
Setting Bluetooth (ON/OFF)
To activate the Bluetooth option, press the ENTER button when the “Bluetooth” field is selected. When
Bluetooth is activated, the screen looks like in the figure below (green colored status):
3.5 Measuring with RMO-H
The start screen for setting the measurement parameters is presented in the figure below:
User can set the test current by using UP/DOWN buttons. No additional setting is needed for starting the
test. The measurement can start by pressing the Ω button or with the trigger button on the Kelvin probes.
Figure 3-9:
The Language screen
Figure 3-11:
Setting the test current in
start screen
Figure 3-10:
The Bluetooth
activation

DV Power RMO-H Specifications

General

Brand	DV Power
Model	RMO-H
Category	Measuring Instruments
Language	English