To Next PageTo Next Page
Need help?Do you have a question about the Dwyer Instruments DH-006 and is the answer not in the manual?
General| Brand | Dwyer Instruments |
|---|---|
| Model | DH-006 |
| Category | Controller |
| Language | English |
Lists key operating parameters such as service, materials, accuracy, stability, and pressure limits.
Details the voltage requirements and power consumption for both high and low voltage operation.
Describes the output signal type and the electrical and process connection methods.
Details the electrical rating and set point adjustment for the built-in relays.
Illustrates the terminal connections for power, relays, and serial communication.
Provides crucial notes on power connections, conductor ratings, isolation, and grounding.
Advises on mounting location, panel preparation, and handling precautions for installation.
Guides on adjusting set points (SPIH, SPIL) for relay turn-on and turn-off points.
Selects the output type for the instrument.
Details the options for control modes: 1SP, 2SP, and SPAL.
Explains direct and reverse acting modes for the SP1 relay.
Configures the alarm type as High, Low, or High/Low.
Sets alarm thresholds (High/Low) and describes fixed dead bands.
Scales the 4-20 mA output by setting low (4mA) and high (20mA) display readings.
Procedures for calibrating the zero and span of the instrument.
