EasyManua.ls Logo

DX Engineering 5-BTV - Hustler BTV Antenna Model Descriptions; Antenna Mechanical and Electrical Design

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 5 -
Hustler
®
BTV Antennas
The Hustler
®
4-BTV is a four-band trap vertical antenna
providing an omni directional pattern. The 4-BTV is
designed as a self supporting vertical to provide optimum
performance on the 10, 15, 20 and 40 meter bands. This
antenna is designed for installations with restricted space.
The Hustler
®
4-BTV is approximately 19 feet tall. It can also
be adapted to operate on the 75/80 meter band by adding the
RM-80S resonator and the 4457-1 three blade spider
assembly on top of the 4-BTV. If the 75/80 meter resonator is
attached to the 4-BTV, it may be desirable to guy the antenna
above the 20 meter trap with small diameter polypropylene
rope.
The Hustler
®
5-BTV is a five-band trap vertical antenna.
This antenna includes the RM-80S resonator and the 4457-1
three blade spider assembly. The 5-BTV is designed to
provide excellent performance on the 10, 15, 20, 40 and
75/80 meter bands. The Hustler
®
5-BTV is approximately 24
feet tall.
The Hustler
®
6-BTV is a six-band trap vertical antenna. The
6-BTV is designed to provide excellent performance on the
10, 15, 20, 30, 40 and 75/80 meter bands, using four traps
and the RM-80S resonator. The design of the 6-BTV is sleek,
with no capacity spiders and is approximately 25 feet tall.
The Hustler
®
BTV antennas provide automatic electrical
selection of the bands through the use of optimum Q traps,
which are individually and precisely tuned at New-Tronics.
The traps are parallel tuned circuits which provide efficient
isolation between the vertical sections, permitting multi-band
operation. Efficient operation over the many ham bands at
good SWRs is possible in a proper installation.
The Hustler
®
BTV antennas were designed to provide optimum performance from both an electrical
and mechanical standpoint. Mechanically, this antenna boasts a heavy duty base and heavy duty
aluminum tubing. The mechanical assembly is accomplished with all stainless steel hardware. The
use of clamps permits re-adjustment if necessary, and allows tuning of each band. The mechanical
construction is such that guying is not ordinarily needed.
The performance provided by the Hustler
®
BTV antenna is better than any other antenna of this
type. Broad banding is such that one setting permits both phone and CW operation on most bands.
The antenna provides a nominal 52 Ω base impedance when installed and tuned according to
instructions. The radiation efficiency is equivalent to, or greater than, other trap verticals.

Table of Contents

Other manuals for DX Engineering 5-BTV

Related product manuals