9
2.5. Before you start
Before using the camera, some basic settings need to be configured and
are described in the following sections.
2.5.1. Setting the date and time
1. Turn on the camera, and press the MENU button to display the
menu screen.
2. Move the joystick right to show the setup menu and move it
down to highlight the Date/Time option. Press the joystick to
confirm.
3. Use the joystick to highlight each field, and adjust the value. After
the changes are done, press the joystick to confirm.
4. Press the Menu button again to exit.
To Next Page
Loading...
Need help?
General
