To Next Page

To Previous Page

4.4.9. USB Mode

Use USB mode to connect the camera to a PC or printer with USB

cable.

1. Turn the camera on, and press the MENU button to display the

menu screen.

2. Move the joystick right to show the setup menu and move it

down to the second page to highlight the USB Mode option.

3. Use the joystick to select a PC or a Printer, and press it to confirm.

4. Press the Menu button to exit.

4.4.10. TV

Use the TV option to set the TV system for the area.

1. Turn the camera on, and press the MENU button to display the

menu screen.

2. Move the joystick right to show the setup menu.

3. Move the joystick right to show the setup menu and move it

down to the second page to highlight the TV option.

4. Use the joystick to select PAL or NTSC, and press it to confirm.

5. Press the Menu button to exit.

Questions and Answers:

Need help?

Do you have a question about the DXG DXG-518 and is the answer not in the manual?

DXG DXG-518 Specifications

General