26
3.6. Playback mode
Use Playback mode to review all the files stored in the camera.
3.6.1. Displaying file information
Basic information is displayed by default on each image or video when
viewed in Playback mode. Press the Display button to switch this
information on or off.
1. Turn on the camera and make sure it is in Playback mode.
2. The most recent file will be shown on the LCD screen with basic
information such as file type, storage directory, battery, etc.
3. Press the Display button for the first time to show detailed file
information when captured.
4. Press the Display button the second time to remove all the
information on the screen and show only the picture.
5. Press the Display button for the third time to restore basic
information.
Note: Video files only show basic information. Pressing the display
button will remove the information from the screen. Pressing the
button again will restore it.
To Next Page
Loading...
Need help?
General
