22
See the table below for a description of each button’s function.
Button Name Function
Display To switch between LCD display modes.
Zoom Use to zoom in or out in Photo or Video
modes. Use to increase or decrease
image size in Playback mode.
Flash To cycle through the flash modes.
Menu Press to display the main OSD menu.
Joystick Use to navigate the OSD menus.
Power Press to turn power on or off.
Mode Use to select Shutter Priority, Auto,
Manual, Scene, Setup, Connect,Video,
Playback or Continuous mode.
Shutter Press to capture a picture in Shutter
Priority, Auto, Manual, or Scene mode;
or start/stop video recording in Video
mode. The shutter button is in the
center on the mode dial.
To Next Page
Loading...
Need help?
General
