DXG DXG-608 User Manual

3.7.9 Language
See “Setting the language” on 2.5.3 .
3.7.10 Reset
U se the reset option to reset all settings to the factory default.
To use the reset function:
1. Set the camera to set up mode using the mode dial.
2. Highlight the reset option using the joystick (left and right).
Press the center joystick button to confirm.
3. Press the center joystick button to reset all settings to the
factory default.
3.7.11 Frequency
Use the frequency option to set the LCD screen frequency to
the same frequency as the mains power supply in your area.
This is to limit flickering on the screen when viewed under
rtificial light.
a
To set the frequency:
1. Set the camera to set up mode using the mode dial.
2. Highlight the frequency option using the joystick (left and
right). Press the center joystick button to confirm.
3. Use the joystick (up and down) to highlight the frequency
option you require (50HZ or 60HZ).
4. Press the center joystick button to confirm.
3.7.12 TV out

DXG DXG-608 Specifications

General

Brand	DXG
Model	DXG-608
Category	Digital Camera
Language	English