59
Menu options in continuous mode are almost exactly the
same as in auto mode, see “Menu options” on 3.4.6. However,
there is an extra option to enable you to change the
ontinuous option.
c
To set the continuous option:
1. Press the menu button to display the menu.
2. Use the joystick (left and right) to highlight the CONT
option and press the center joystick button to confirm.
3. Use the joystick (up and down)
to highlight a cont setting and
press the center joystick
button to confirm.
Bracketing (BKT): Select between 3 Continuous Shots
and 5 Continuous Shots. Select a scope for the Standard
Exposure Value; you can adjust foraccording to the
Standard Exposure Value.
Auto Continuous Capture: Continuous capture settings
are automatically set and cannot be adjusted.
Zoom Continuous Capture: Continuous capture shots
are automatically taken after zooming. This method takes
longer than Auto Continuous Capture.
4. Press the menu button to exit the menu.
The continuos capture setting remains active until you change
it.
58
To Next Page
Loading...
Need help?
General
