Dymo LabelManager 260P - Inserting the Label Cassette

7
en
Inserting the Label Cassette
Your label maker comes with one label
cassette. Visit www.dymo.com for
information about purchasing additional
label cassettes.
To insert the label cassette
1 Lift the label cassette cover to
open the label compartment.
See Figure 3.
2 Before using the label maker
for the first time, remove the
protective cardboard insert
from the label exit slot. See
Figure 4.
3 Insert the cassette with the
label facing up and positioned
between the label guides.
4 Press firmly until cassette clicks into
place. See Figure 5.
5 Close the label cassette cover.
Figure 3
Label
guides
Remove
cardboard
insert
Figure 4
Figure 5
Click!
Click!