Dymo LabelWriter 300 series User Manual

THERMAL TICKET PRINT SERVER
Citizen CL series printer set up
Step 5 for Unbranded thermal ticket stock - setting the ticket
cutter: Set the Start Offset to “0.0mm” and the Stop Offset
“8.0mm”. Click “Apply”.
6
Step 5 for TicketSource-branded thermal ticket stock -
setting the ticket cutter: Set the Start Offset to “0.0mm” and
the Stop Offset “18.0mm”. Click “Apply”.
Step 6 - Click the “Graphics” tab and set the Dithering option
to “None”. (Please note: choosing an alternative Dithering
option could render barcodes unreadable to a barcode
scanner) Click “Apply” and click “OK” to finish.
Step 7 - A reboot of your computer will be required for some of the Citizen printer settings to take effect.

Dymo LabelWriter 300 series Specifications

General

Brand	Dymo
Model	LabelWriter 300 series
Category	Label Maker
Language	English