ENG
3
3. After a few seconds, remove the item from the scale.
The weight continues to be displayed for about ten seconds. Changing
the Units of Measure
Your scale can display weight in English (pounds) or metric (kilograms) units. The default unit
of measure is metric. Each time you turn on the scale, the scale defaults to the unit of measure
that was last used.
To change the units of measure
Press to toggle between English and metric units.
2
Caring for the Scale
With proper care and handling, your scale will give you years of service. Keep the following
in mind when using your scale:
• Your scale works best when operated and stored at normal room temperature. Avoid
lengthy exposure to extreme heat or cold.
• Only operate the scale on a stable, vibration free surface.
• Exposure to dust, dirt, moisture, vibration, and air currents; and proximity to other
electronic equipment can affect the reliability and accuracy of your scale.
• Using the scale in proximity to wireless devices, such as mobile phones, can cause the
scale display to fluctuate when the device is in use.
• Although this scale is designed to be quite durable, gently place items to be weighed on
the platform. Avoid rough treatment, as this may permanently damage the internal
sensor and void your warranty.
• You can permanently damage the scale by placing significantly overweight items on the
scale platform.
• Avoid shaking, dropping, or otherwise shocking the scale. This is a precision instrument
and MUST BE HANDLED WITH EXTREME CARE.
• The scale has been calibrated at the factory and will not need to be calibrated again.
To Next Page
Loading...
