Need help?Do you have a question about the Dymo RHINO 6000 and is the answer not in the manual?
General| Print technology | Thermal transfer |
|---|---|
| Display | LCD |
| Keyboard layout | ABC |
| PC connected | Yes |
| Number of batteries supported | 1 |
| Compatible operating systems | Windows |
| Bundled software | Rhino Connect |
Weight and Dimensions| Depth | 66 mm |
|---|---|
| Width | 124.5 mm |
| Height | 246.4 mm |
| Weight | 898.11 g |
Connect printer for power using AC or battery.
Connect the 110V-240V power adapter to charge battery and operate printer.
Install the rechargeable Lithium-ion battery pack or AA alkaline batteries.
Recharge the battery pack while connected to the power adapter.
Insert and remove tape cassettes for label printing.
Set the tape width to match the installed cassette for correct label formatting.
Choose the printer's language for menus and special characters.
Select units of measure (inches or millimeters) for label settings.
Turn the printer on/off. Auto-off after inactivity saves power.
Understand the display elements: caption bar, feature indicators, battery level.
Turn on the backlight for better visibility in low light conditions.
Adjust display contrast for better readability in different lighting conditions.
Hide the caption bar to display more lines of text on the label.
Toggle capitalization on/off for text entry.
Use Shift keys to access secondary functions or symbols above keys.
Use Esc to return to the previous menu without making a selection.
Learn how arrow keys and OK navigate menus and select items.
Use the backspace key to delete the character to the left of the cursor.
Use the Clear key to reset text and formatting to the General label type.
Cut the printed label tape. Can be configured for continuous printing.
Access quick functions for label types, barcodes, symbols, and text library.
Create and save label files, which can contain one or more labels.
Add new labels to an existing label file at cursor position.
Delete specific labels or all labels from a label file.
Print all, current, or a range of labels from a saved label file.
Select from eight text sizes, including Auto and BIG, for label text.
Apply styles like bold, italic, underline, or boxed to text.
Create labels that wrap vertically around wires or cables.
Create labels that wrap horizontally along wires or cables.
Create labels where clear tape wraps around and covers printed text.
Create labels that wrap around cables, leaving text extending out like a flag.
Set a specific, fixed length for labels regardless of text length.
Label rows of ports on a patch panel with evenly spaced text.
Create labels for terminal blocks with text printed vertically for each block.
Create labels for rows of fuses, specifying fuse width and number.
Adjust the size of individual fuse modules within a module label.
Option to print empty modules at the end of module labels.
Add various types of barcodes (Code 39, UPC, EAN) to labels.
Edit or delete existing barcodes on a label.
Remove a barcode from the label.
Choose to hide or show the human-readable text below the barcode.
Insert pre-defined symbols from various categories into labels.
Insert custom symbols downloaded from RHINO Connect Software.
Add pre-defined text strings from the library to labels.
Add custom text strings directly to the library or via software.
Remove custom text strings from the My Library category.
Create label series by incrementing one character in the pattern.
Create label series by incrementing two characters simultaneously.
Create label series by incrementing two sequences consecutively.
Print up to 99 copies of the same label.
Print label files in a collated order for multiple copies.
Configure whether to pause for manual cutting between labels.
Feed the label tape in 5/16" increments for spacing.
Adjust print contrast to lighten or darken text for optimal readability.
Save created label files to the printer's memory for later recall.
Load saved label files from memory to print or edit.
Remove stored label files from the printer's memory.
Electrical symbols for circuit diagrams and components.
Symbols related to voice and data communication equipment.
Symbols for audio and video equipment and signals.
Warning symbols for safety and alerts.
Punctuation marks and special characters for labels.
Various types of brackets used in text.
Directional arrows for indicating flow or position.
Fractional numbers and symbols.
Symbols for home electrical systems and appliances.
Currency symbols for various denominations.
Pre-defined text strings for room and area locations.
Library text for audio equipment and settings.
Library text for video equipment and settings.
Solutions for low or empty battery messages.
Solutions for issues with print quality.
Resolve motor stalls caused by tape jams.
Fix issues with uneven or slanted printing due to cassette insertion.
Resolve problems closing the tape cassette lid.
Navigate back to previous menus using Esc or Clr.
Troubleshoot a blank display by checking power and connections.
Address messages indicating the end of tape has been reached.
Improve display readability by adjusting backlight and contrast.
Resolve issues with too many lines for tape width by adjusting tape or text.
Fix errors when barcodes are not allowed on current tape width.
Resolve issues when Self-Lam labels are not allowed on current tape width.
Troubleshoot general print errors, often related to tape jams.
Resolve issues with unresponsive keys, possibly due to jamming.
Safety guidelines for charging the battery pack.
Safety guidelines for using the battery pack.
To Next Page
