To Next Page
D
Daniel ComptonJul 26, 2025
What to do if my Dyna-Glo Delux KFA50DGD Heater will not turn on?
- WwongmeganJul 26, 2025
If your Dyna-Glo Heater won't turn on and the indicator lamp is off, it could be due to several reasons. First, the temperature limit safety device might be overheated; in this case, turn the power switch to "OFF" and allow the heater to cool for about 10 minutes. Second, there might be no electrical power, so check that the heater cord and any extension cords are properly plugged in and verify the power supply. Third, a fuse might be blown, requiring you to replace the safety fuse in the PCB board. Finally, there could be a bad electrical connection between the temperature limit safety device and the PCB board; in this case, check the electrical connections.
General
